Monday, 28 April 2014
Friday, 10 January 2014
Stop Rust Permanently with POR15
Use the POR15 System to
Stop Rust Permanently!
STEP 1 - Degrease and Clean Surface
| STEP 2 - Neutralize Rust; Etch Metal | ||
Clean metal surfaces with water-based Cleaner Degreaser. It is environmentally safe, removes dirt,
grease, wax and other contaminants that interfere with restoration.
|
Spray Metal Prep on the surface to remove rust
or prepare it for POR-15 Rust Preventive Coating.
Metal Prep neutralizes rust, etches metal for better
adhesion, and coats it with zinc phosphate for permanent adhesion.
| ||
STEP 3 - Apply Rust Preventive Coating to Surface |
STEP 4 - Topcoat the Surface
| ||
Apply a coat of POR15 Rust Preventive Coating.
You'll get an unbelievably tough, hard, finish that won't crack, chip, or peel. It's so tough you can pound it with a hammer and not damage it! That's REAL protection! |
Finish your job with a POR-15 Top Coat or any other
POR-15 coating that suits your needs. Most of them have no sensitivity to UV light. They are highly flexible, non-porous, extremely scratch and chip resistant, and strengthened by exposure to moisture. |
The secret lies in POR15's curing process. Most paints dry through
evaporation, but POR15 dries faster when moisture is present. It has
the opposite chemistry of ordinary paints. Now add to that POR15's
incredible hardness, toughness, and flexibility, and you have a coating
that is practically indestructible.
|
Subscribe to:
Posts (Atom)