Very useful punch set for machinists, hobbyst, automotive and construction industry

No excuses now for using expensive silver steel or old nails as drifts. Our new combo punch set covers the range and with its neat pocketed case and will allow you to pick the right punch for the job. Our set comes in a plastic pouch and includes:

8 brass punches from 1/16th to 5/16th

5 long steel parallel punches 1/8th to 3/8th

1 centre punch

More information on punch sizes are available on the Frost Auto website... Our new Combo Punch Set costs £17.75 only, buy yours now at www.frost.co.uk !

Produce Clean Welds with Minimal Grinding

The Intergrips Welding Panel Clamps are a real boon to Car and vehicle restorers. They helps you produce clean welds with minimal grinding !

They are ideal when welding patch repairs in floors, wings, door skins etc. or when assembling fabricated panels on reskinning projects.

They will clamp flat, curved or even pressed ribbed panels.

They will hold any shape panel in place anywhere - edge to edge and perfectly prior to butt welding, leaving only a small gap which will allow full penetration of the weld.

Once the two sections are tack welded together, the wing nut is slackened, the toggle bar removed and the clamp lifted from the job prior to final welding. The end result is a first class welded butt joint with very little dressing being necessary.

The Eezibleed Brake Bleeder Kit is an Essential Brake Tool!

The Gunson Eezibleed Kit is the Standard For Affordable Brake and Clutch Bleeding Systems! Eezibleed has an airtight seal on the reservoir ensures:

Fautless one man operation

Fast fluid replacement

No contamination

No damage to the system

Easy to follow instructions

How does it work?

Eezibleed is a clever little bleeder that uses the pressure in your spare tyre to bleed air and old fluid from your hydraulic system. It eliminates the need for a helper as you no longer need to pump the pedal.

Just connect the Eezibleed as instructed then open each bleed valve in turn until new fluid starts to flow through.
Eezibleed is supplied with a variety of caps to fit different master cylinders. Gunson Eezibleed Multi-Purpose Cap may be required for non-screw type reservoirs.

Different Applications

Eezibleed can be used successfully on the following systems: Tandem master cylinders without sensors, Tandem reservoirs, Slave servos, Vacuum Servos.

More info on the Frost Auto Website

Two tools in one with the Joggler Hole punch

The Joggler Holepunch is a godsend for the amateur and professional body worker; It is the perfect tool when jointing two pieces of sheet steel together. Two tools in one an edge joggler and hole punch so you can produce a perfect flush welded lap joint with minimal effort.

The joggler lays down a step 12mm wide along the panel edge in mild steel up to 1.2mm (18g). The long handles make it easy to use, and by simply twisting the head it makes an excellent hole punch making perfect 5mm holes every time, ready for plug welding. This robust tool brings professional quality work to your fingertips.

Easy and inexpensive alternative to welding, soldering, and brazing

J-B WELD is indispensable for any mechanics, farmers, homemakers and almost everyone! J-B WELD Adhesive is packaged in two tubes. One contains liquid steel / epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel and with similar properties.

How use J-B WELD?
Use JB Weld Adhesive as an adhesive, laminate, plug, filler, sealant, and electrical insulator.
1/ Squeeze out equal portions from the black and red tubes
2/ Mix thoroughly
3/ Clean surface to be bonded
4/ Apply J-B WELD and let it cure

Like metal, J-B WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. J-B WELD is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water.

What does J-B WELD bond to?
JB Weld bond to just about any porous and non-porous material, virtually any combination of iron, steel, copper, aluminium, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fibreglass, wood, fabric, paper.