Friday, 10 January 2014

Stop Rust Permanently with POR15

Use the POR15 System to 
Stop Rust Permanently!
STEP 1 -  Degrease and Clean Surface

STEP 2 -  Neutralize Rust; Etch Metal
Clean metal surfaces with water-based Cleaner Degreaser. It is environmentally safe, removes dirt,
grease, wax and other contaminants that interfere with restoration.
Spray Metal Prep on the surface to remove rust
or prepare it for POR-15 Rust Preventive Coating.
Metal Prep neutralizes rust, etches metal for better
adhesion, and coats it with zinc phosphate for permanent adhesion.

STEP 3 -  Apply Rust Preventive
Coating to Surface
STEP 4 - Topcoat the Surface
Apply a coat of POR15 Rust Preventive Coating.
You'll get an unbelievably tough, hard, finish that won't crack, chip, or peel. It's so tough you can pound it with a hammer and not damage it! That's REAL protection!
Finish your job with a POR-15 Top Coat or any other
POR-15 coating that suits your needs. Most of them have no sensitivity to UV light. They are highly flexible, non-porous, extremely scratch and chip resistant, and strengthened by exposure to moisture.

The secret lies in POR15's curing process. Most paints dry through evaporation, but POR15  dries faster when moisture is present. It has the opposite chemistry of ordinary paints. Now add to that POR15's incredible hardness, toughness, and flexibility, and you have a coating that is practically indestructible.
POR15 is great for auto restoration. You can use it to to protect expensive and valuable equipment against rust, abrasion and even graffiti. POR-15 also has excellent "surface tolerance", which means it works very well on porous surfaces.


  1. Nice job done by you i like your post very much thanks for shearing this with us.
    Vintage Cars in Jaipur | Vintage Cars Restorations Jaipur

  2. Thanks for all the advice, this is good to know. I am trying to get as many years out of my car as I possibly can. I will have to try all of these tips.